elite cs-18 high power dc-12ghz multi - throw switch sp3t to sp6t versions only normally open specifications rf contacts: b rea k bef ore ma ke actuator v olt ag e (v dc) 20 o c 12 15 28 curren t (ma) 600 480 270 switching time: 20 msec max c onnectors : sm a (f) , tnc(f) (max frequency 11ghz only) *, n t ype (f) weight: 9 oz. max (3 position) 11 oz (6 position) t emperature range: -55 o c to +85 o c (operating) shock: mil-std-202 method 213, condition d (500g non operating) vibration: mil-std-202 method 214, condition d (10g rms non operating) humidity: mois ture seal a vailable typical contact life: 5 m illion cycles rf power handling sp ec ifi cation s dc-1 ghz 1-4 ghz 4-12 ghz (tnc 11ghz only) vswr (max) 1.25:1 1.40:1 1.70:1 insertion loss (min) 0.30 db 0.40 db 0.50 db i solat ion (max) 70 .0 db 60 .0 db 60 .0 db 3000 800 400 200 80 40 10 )sttaw( wc rewop 0.1 1.0 4.0 10 18 26.5 frequency ghz high power connectors standard n type connectors the cs- 18 switc h is a broadband multi-position coaxial switc h designed to switc h rf signals from one input port to any one of 3 through 6 output ports. it is readily adapted to any 50 ohms transmission line system. the standard actuator gives individual solenoid control of each posit ion and when de-energized , all posit ions are open . st andard act uat or volt age is 28 vdc. the primary advantage of this switch over the min- iature versions shown on previous pages is the higher power handling cap abilit y. sp 7t and sp 8t ve rsion av ailable . s ee addit ional datasheets typical performance 15 25 ssol nruter 0.01 12.0 frequency ghz 0.01 frequency ghz 0.0 0.4 bd li 12.0 bd noitalosi 90 80 70 60 t el: (800) 351-7368 www.teledynecoax.com email: coax@teledyne.com specifications subject to change without notice. 10/2007
ser ies connectors actuator v olt age part numbering system for cs-18 (normally open) cs-18 n 1 5 o - t opt ions actuator type number of switch positions connector s: sma female n: n type female t: tnc female* actuator voltage 1: 28vdc normally open 2: 15vdc normally open 3: 12vdc normally open actuator t ype o: no indicator contacts c: indicator contacts for other options cont act factory number of pos itions 3: sp3t 4: sp4t 5: sp5t 6: sp6t see additional datasheet for sp7t and sp8t versions h = 2.15 std model h = 2.65 ttl model ana log indicators ttl options t: ttl drivers with diodes r: positive + common td: ttl driver with decoder elite cs-18 high power dc-12ghz multi - throw switch sp3t to sp6t versions only normally open sp3t sp4t sp6t sp5t t el: (800) 351-7368 www.teledynecoax.com email: coax@teledyne.com specifications subject to change without notice. 10/2007
|
